Wind Turbines

12 Volt Wind Turbines

24 Volt Wind Turbines

48 Volt Wind Turbines

110 Volt Wind Turbines

Ampair Wind Turbines

Southwest Windpower Wind Turbines - Air X / Whisper

Westwind Wind Turbines

Wind turbine parts

History of Wind turbines

The first known wind turbines were used in Persia as early as 200 B.C. and were used for for grinding grain. The same type of wind turbines were later introduced into the Roman Empire by about 250 A.D. By the 14th century the Dutch were using wind turbines for pumping and as mills. By 1900 the Dutch had about 2500 wind turbines that produced an estimate peak power of about 30 mega-watts.

The first wind turbine that was used for producing electricity was built in Cleveland, Ohio by Charles F. Brush in 1888, and in 1908 there were 72 wind-driven electric generators from 5 kW to 25 kW. By the 1930 wind turbines were mainly used in remote areas to produce electricity as the electricity distribution grid was not widespread. The predecessor tp modern horizontal-axis wind turbine was in service at Yalta, USSR in 1931. This was a 100 kW generator on a 30 m tower, connected to the local 6.3 kV electricity distribution grid. It was said to have an annual load factor of 32 per cent, which is not much different from current wind turbines.

Horizontal axis wind turbines

Horizontal axis wind turbines have the main rotor shaft and electrical generator at the top of a tower, and must be pointed into the wind. Small turbines are pointed by a simple wind vane or tail. Large turbines often use a wind sensor coupled with a servomotor. Most large wind turbines use a gearbox, which turns the slow rotation of the blades into a quicker rotation that is more suitable for generating electricity.

A tower produces turbulence behind it, so the wind turbine is usually pointed upwind of the tower. Blades for an upwind vertical axis wind turbine are made stiff to stop the blades from being pushed into the tower by high winds. Downwind wind turbines have been built, despite the turbulence, because they don't need an additional mechanism for keeping them in line with the wind, and at in high winds, the blades can be allowed to bend which reduces their swept area and thus their wind resistance. Because turbulence leads to fatigue failures and reliability very important for remote area power systems, most horizontal axis wind turbines are upwind machines.

Vertical axis wind turbines

Vertical axis wind turbines have the main rotor shaft running vertically. The advantages of this configuration are that the generator and/or gearbox can be placed at the bottom, near the ground, so the tower doesn't need to support the additional weight, and that the turbine doesn't need to be pointed into the wind. They generally also operate at lower wind speeds. However, they are not as efficient at extracting energy from the wind.